Abrasive sand is coated with 940 mm width 1650 mm range the standard 50 or 100 feet tall Jumbo rolls are produced. Then converted by the end-user demand is formatted.
Sheet
Hand or vibration motor, suitable for paper or cloth support (Wet or Dry)
Fracture important. The most commonly used size 230 * 280 mm
Disc
Flap Disc: 100,115,125,180 mm diameter standard. Half horizontal alignment of the leaves on a plate sander. Electric hand with the engine.
Velcro Disk: 77, 90, 115, 125, 150, 180, 200 mm in diameter. Velcro or PSA (Adhesive)
Perforated or solid, pneumatic or electric motor with an eccentric.
Fiber Disc: 100, 115, 125, 150, 180, 230 mm in diameter. 0.8 mm covered with a vulcanized material.
22 mm core diameter. To soften the star-shaped channels 180 and 230 mm diameters.
Roll
100, 150, 200, 250, 300 mm wide standard. Also, be cut to desired size ease. 50 feet tall balls. Hand or with vibrating motors.
Belt
Narrow Band: 10-300 mm in width.
Broadband: 300-1300 mm in width.
Caliber Band: 1300 mm larger than.
Zigzag, flat film bonding. Overlays (support), overlay + paste by scraping end to end. Hand and stationary machines.
Flap Wheel
Flange Flap Wheel: The combined sheet metal on the axis of the grinding wheel leaves. 165, 25 250 mm in diameter, 50 mm wide standard. 100, 500 mm in diameter 10, width up to 250 mm can be manufactured.
Hand and stationary engines.
Pit Heat Wheel: The combined resins combined with abrasive wheels of the leaves. Cookware for sanding deep as the material covered. 140, 165, 200 mm in diameter and 10 mm width to produce 25. The hub 20 mm.
Rotary automatic machines.
Fringed Flap Wheel: Fringed sheet metal on the axis of the combined grinding wheel from the leaves. 165, 25 250 mm in diameter, 50 mm wide standard. 100, 500 mm in diameter 10, width up to 250 mm can be manufactured. Check shaped holes and sanding material. Fixed by automatic machines.
Sleeved Flap Wheel: 6 mm metal pin axis of erect small wheels in the sand combined. 20, 30, 40, 50, 60, 80 mm diameter, 10 to 100 mm wide, simple to use.
Stylish with hand machines.
M14 Threaded Flap Wheel: M14 nut on the axis of the combined sanding sheets castors. 100, 115, 125 mm diameter, 20 mm and 40 mm wide, simple to use.
Electric hand with machines.
Pleated(V) Flap Wheel: Breaking through the middle of the leaves of the combined disc sander. 125, 165, 250 mm diameter, 22 mm core, simple to use. Electric hand with machines.
